WhatsApp calls on a SIP phone and your own PBX

    4 min read
    ·
    28 views
    ·
    Updated 11/17/2026

    You can receive WhatsApp calls on an office SIP phone, a softphone app on a computer or smartphone, or your own PBX. WazzaBee creates the login and password itself: you click a button, copy the details and enter them in the device.

    Before you start

    • A WhatsApp Business API line in WazzaBee.
    • The number is connected without the app on the phone. On a number in Coexistence mode (the WhatsApp Business app on the phone and the API at the same time) WhatsApp does not enable API calls: customers call the app on the phone.
    • Calls turned on for this line. Meta enables calls from a limit of 2,000 conversations a day. The limit is shown in the Calls section next to the line number: if it is lower, the dashboard shows how to raise it instead of the "Turn on calls" button. A new number first needs business verification in Meta.
    • A device that works over SIP via UDP: a desk SIP phone (Yealink, Grandstream, Fanvil and others), an app (MicroSIP, Zoiper, Linphone) or a PBX (Asterisk, FreePBX, 3CX and others).

    Step 1. Get a login and password

    1. Open the Calls section in the WazzaBee dashboard.
    2. If you have several lines, pick the right one at the top of the page.
    3. On the “SIP phone and your own PBX” plate, click “Connect”.
    4. Choose what you are connecting: a desk phone, an app or your own PBX. Instructions for that case appear below.
    5. Click “Issue a login”. The login and password appear, each with a Copy button.
    FieldValue
    Server addresspbx.wazzabee.com
    Port5060
    ProtocolUDP
    CodecsG.711 (alaw, ulaw)
    Login and passwordfrom the dashboard, unique for each device

    Step 2. Enter the details in the device

    Desk phone

    1. Open the phone settings in a browser: the phone's address is shown in its Status or Network menu.
    2. In the Account section, enable the account and enter the server address, login and password. Enter the login both as the user name and as the authentication name.
    3. Port 5060, UDP protocol, leave everything else as is, and save.

    App on a computer or smartphone

    1. Install the app from its official website.
    2. Add an account: enter the server address as the SIP server or domain, the login as the user, and the password.
    3. UDP protocol, leave everything else as is, and save.

    Your own PBX

    1. Create an external line (SIP trunk) with registration on our server.
    2. Take the server address, login and password from the dashboard. Port 5060, UDP, G.711 codecs.
    3. Route incoming calls from this line to the right group or voice menu of your PBX.

    How to check that it works

    The login shows “Online” in the dashboard. Call the line on WhatsApp from another number: the device will ring. If it shows “Offline”, check the server address, login, password and the device's internet connection, then click “Check again”.

    Several devices

    One login connects one device. Need three phones at the front desk? Issue three logins with “Issue another login”. One line can have up to 10 logins. The call rings on all devices and in the other places that are turned on (dashboard, Bitrix24, amoCRM) at once, and whoever picks up first takes it.

    Calling customers from the device

    You can call customers on WhatsApp from the line's number. Dial the full number with the country code, or with 8 for Kazakhstan. You can call customers who allowed WhatsApp calls, up to five times a day. Minutes are charged to the line balance.

    Turn on, turn off, delete

    • The switch on the “SIP phone and your own PBX” plate turns calls on and off for all devices of the line. Logins are kept.
    • “Delete login” disconnects one device. The dashboard asks you to confirm first.
    • If you turn off calls on the whole line, logins are kept too: you won't need to enter them again.

    A regular SIP number from a telecom operator

    If you need to connect a regular SIP number from your telecom operator, write to support from the dashboard. We connect such numbers on request.